Air Source Heat Pump - Home Version (14PLR-EV35)

Product parameters

Specification

14PLR-EV35

Maximum outlet temperature(°C)

60

Rated heat production (KW)

35

Water flow/water resistance(/h/kPa)

6.02/62

Rated heating consumption power (KW)

10.87

Water side heat exchanger/water side pressure(MPa)

Coaxial tube heat exchanger/1.6

C0P (W/W)

3.22

Inlet and outlet pipe diameter/pipe diameter interface

DN25/External thread

Nominal cooling capacity (KW)

24

Net weight/gross weight(kg/kg)

175/190

Nominal cooling power consumption (KW)

9.24

Unit size (L/W/H)(mm)

1120*400*1560

COP (W/W)

2.60

refrigerant

R410

Can match the system unit form

Fan coil type/radiator type/floor heating type

Noise (cooling/heating)(dB(A))

63/65

Rated power supply

380V 3N-50HZ

Heating/cooling operating range

-35-40°C/5-48°C

Maximum output power/current (KW/A)

15.5/27.0



1. Test the working condition description

Rated heating conditions: outdoor inlet dry bulb/wet bulb temperature 6/7°C, outlet temperature 45°C.

Nominal heating conditions: outdoor inlet dry bulb/wet bulb temperature -12/-13.5°C, outlet temperature 35/41/50°C.

Low temperature heating conditions: outdoor inlet dry bulb/wet bulb temperature -20/-°C, outlet temperature 35/41/50°C.

Nominal cooling conditions: outdoor inlet dry bulb/wet bulb temperature 35/-1°C, outlet temperature 7°C.

2. Product execution standard GB/T25127.2-2020 GB/T18430.2-2016 GB/T37480-2019

Product Overview

The heating area of the14LR-EV35 air energy heat pump heating host is 250-300 square meters, which can be matched with a variety of heating terminals, including the following types: floor radiant type, fan coil unit type, radiator type. The host intelligence is an intelligent control system, which is convenient and intelligent to operate. Heating and cooling are dual-purpose. Our company will recommend the best cost-effective products for you according to different application scenarios of customers. Welcome to consult.

Air source heat pump heating is one of the latest environmentally friendly ways to replace traditional heating, for the excellent household heating heat pump unit adopts jet enthalpy increase frequency conversion technology, in the -35 °C ultra-low ambient temperature is still strong heating, and at the same time has the function of summer refrigeration, to meet the comfort needs of the four seasons of the year, to provide you and your family with a warm and comfortable home environment.

Jet enthalpy conversion technology

DC frequency conversion + jet enthalpy compression technology, low temperature heating capacity is stronger.

-35°C ultra-low temperature stable and reliable operation

Heat pump compressor with ultra-high compression ratio, reliable operation at ultra-low ambient temperature of -35°C.

Efficient heating

The 580mm large-diameter wind turbine increases the air volume by more than 5% and reduces the low-temperature operation capacity.

Intelligent defrost control

Non-traditional timed and constant temperature defrosting control, according to the ambient temperature, waterway temperature, coil temperature, time change rate and other multi-dimensional intelligent judgment of its own frosting situation, to ensure timely defrosting, and to avoid "frost-free defrosting", waste of heat. Achieve precise defrost, fast defrost, and thorough defrost.

Smooth drainage, safe and reliable

The special structural design enables the frost ice water to be discharged smoothly from the outside of the unit, and at the same time, the chassis electric heating control is increased to prevent freezing and drain more smoothly.

Ultra-quiet and quiet enjoy a comfortable life

The combination of full DC inverter technology, active noise reduction and passive sound insulation multiple noise reduction technologies makes the operation quieter and provides a quiet and comfortable sleeping environment.

Fields of application

Various types of living places, villas, apartments and other places



Related Suggestion

Online Message

Submit